Exterior painting

Exterior Painters Perth

Our exterior painters prepare and coat render, brick, weatherboard, eaves, gutters, garage doors and frames for Perth sun and coastal salt.

Fixed written quotes
UV-stable exterior systems
Coastal-grade where needed
Gardens and paving protected
Painter coating a rendered exterior wall using an extension roller

Why exterior paint fails faster in Perth

Perth combines three things that punish exterior paint: very high UV, long dry summers with big daily temperature swings and, across much of the metro, salt air off the coast.

The signs are always the same. North and west walls fade years before the south side. Render cracks finely from repeated heat cycles. Fascia and gutters chalk, and aluminium frames oxidise to a dull white bloom. Meanwhile the sheltered south wall still looks new, so repaints get delayed.

You cannot avoid this, but you can specify for it: UV-stable pigments, a flexible membrane that moves with the wall, and salt-rated primers on coastal jobs.

Every surface our Perth exterior painters cover

An exterior quote is eight or nine jobs sharing one set of ladders. Each has its own prep and its own coating.

Rendered and painted brick walls
The most common Perth exterior. Render is pressure cleaned, and cracks are raked out and filled with a flexible compound, not a rigid filler that cracks again. Chalky areas get a binding sealer. The finish is a 100% acrylic membrane. With a 25ยฐC daily summer swing, flexibility matters more than film thickness.
Weatherboard and fibre cement
Less common in Perth, but standard in character and coastal suburbs. We check boards for rot at ends and fixings, scrape loose paint, prime bare timber with an oil-based or high-adhesion primer, and caulk gaps. Then two coats of exterior acrylic. Sealing the end grain stops moisture wicking in and lifting the paint.
Eaves, fascia and soffits
Eaves are sheltered and clean up well. Fascia takes sun and weather along its length and is usually the first part of a house to look tired. Timber fascia is scraped, primed and finished in exterior enamel. Metal fascia is treated like Colorbond.
Gutters and downpipes
Paint gutters with the fascia while access is up, since the two read as one line from the street. We clean, degrease, treat rust and apply a metal primer before finishing. Skip the degreasing and the top edge peels within a season.
Garage doors
A large, flat, usually metal panel that takes full western sun on most Perth blocks. It needs degreasing, rust treatment at edges and fixings, an etch or metal primer, and a UV-stable finish. A faded garage door ages the whole front of the house.
Window frames, including aluminium
Timber frames are scraped, primed and finished in exterior enamel. Aluminium can be painted too. We clean and degrease the oxidised surface, then apply an etch primer so the topcoat can grip. Dated bronze or mill-finish frames become matte black or charcoal for a fraction of replacement cost.
Front doors and entry
The most closely looked-at surface on the house, and the cheapest to refresh. Doors are sanded, primed and finished in hard-wearing enamel, usually two-pack or a premium water-based enamel if the door takes direct sun.
Decks, pergolas and screening
Horizontal timber is the hardest-wearing surface on any house. Boards are cleaned, grey timber is sanded back to sound wood, and we finish with a decking coating made to flex and be walked on. If a deck needs boards replaced first, we will tell you.

How an exterior repaint runs

Weather and access drive exterior work far more than interior work.

01 Inspection and access plan
We walk the full perimeter, check each elevation, find what is failing and why, and plan access: ladders, trestles or scaffold. Access is often a bigger cost than paint, so we price it here.
02 Protection and cleaning
Gardens, paving, windows and fittings covered. Then a full pressure clean to remove dirt, chalk, mould and loose material. Everything after depends on a clean surface.
03 Repair and preparation
Cracks filled, loose paint scraped, bare surfaces primed, gaps caulked, rust treated. On most Perth homes this is over half the labour.
04 Two coats, elevation by elevation
One elevation at a time, following the shade. Painting in direct afternoon sun flashes the surface and leaves lap marks.
05 Detail, clean and walk-through
Gutters, downpipes, doors and frames go last. Coverings off, site cleaned, and we walk the perimeter with you before sign-off.

What an exterior repaint costs in Perth

Exterior pricing is driven by surface area and access, not bedroom count.

A quote covers preparation, two coats of an exterior acrylic system and the trim in scope. Anything excluded, such as major render repair, extensive rot or full paint stripping, is listed. Vague quotes are where variations come from.

Access is the cost nobody expects. A two-storey home on a flat block with clear access is simple. The same house on a sloping block, with a boundary wall two metres away, may need scaffold. We find this at inspection so it is in the quote, not a variation.

Coastal systems cost more, and they are worth it. Homes within a few kilometres of the coast carry a constant salt load. Salt-rated primers and topcoats cost more, but a standard system fails years earlier. For coastal homes in Cottesloe, Scarborough or Fremantle, ask what is being specified.

Every price is a fixed written figure after an on-site inspection, based on your home, not an average. Quotes are free with no obligation.

When to repaint, and why waiting costs more

Exterior paint keeps water out of the wall. Once it chalks, cracks or lifts, water gets behind it. Render spalls, timber rots from the end grain and steel rusts under the film.

Repaint on time and the job is prep and two coats. Repaint two years late and it starts with repair, the expensive part. Watch for chalking (powder on your hand from the wall), fine cracks in render, paint lifting at edges, and fading on the north or west side.

In Perth, a well-specified exterior system lasts around 8 to 12 years. Expect less on the coast and on exposed western walls.

Roof looking tired too?

The roof shares the same access and set-up day. Quoted together, it costs less than booking it separately later.

Exterior painting questions

Around every 8 to 12 years for a well-specified exterior system, and sooner on the coast or on exposed western walls. Judge it by the weather side, not the sheltered one. North and west walls fade and chalk years before the south, so a house that looks fine from one angle can be overdue from another.

Yes, with the right preparation. We clean and degrease the oxidised aluminium, then apply an etch primer so the topcoat can grip. Done properly, dated bronze or mill-finish frames become matte black or charcoal for a fraction of replacement cost. Without an etch primer the paint peels off in sheets, which is where the idea that it cannot be done comes from.

It depends on the door's size, material and how much rust treatment the edges and fixings need. It is usually inexpensive compared with its impact. A faded door takes up much of the street view and ages everything around it. We price it on site and give you a fixed figure in writing.

Yes. Homes within a few kilometres of the coast carry a constant salt load, which attacks coatings and exposed steel far faster than inland. We use primers and topcoats rated for that exposure. They cost more, but a standard system fails years earlier. If you are in Cottesloe, Scarborough, Fremantle or elsewhere on the coast, ask what is being specified.

Sometimes. Exterior paint needs a dry surface and a clear window to cure, so winter rain can shift the schedule. We also avoid direct afternoon sun, which flashes the surface and leaves lap marks, so we follow the shade around the house. Perth's long dry season means this is usually a scheduling detail, not a real delay.

Book an exterior inspection

We walk every elevation, tell you which are failing and which just look tired, plan the access and send a fixed written quote.