Perth exterior painting costs
Exterior painting prices in Perth, at a glance
Typical 2026 Perth ranges for a prepared, two-coat exterior in a quality UV-stable system. Condition, access and substrate move the number most.
| Home type | Typical range (2026) | Main factors |
|---|---|---|
| Single-storey, good condition | $4,000–$7,000 | Straightforward access, light prep |
| Single-storey, heavy prep | $6,000–$9,000 | Flaking paint, repairs, sealing |
| Double-storey | $7,000–$12,000 | Height, scaffolding, more m² |
| Double-storey, complex / heritage | $11,000–$15,000+ | Access, substrate, detail work |
| Trim / feature only (doors, eaves, fascias) | $1,500–$3,500 | Partial exterior refresh |
What’s actually inside an exterior quote
On an exterior, preparation and access dominate the bill – not the paint. A typical split looks like this:
| Component | Share of the job | What it covers |
|---|---|---|
| Preparation | 40–55% | Pressure-washing, scraping, sanding, treating mould, filling render cracks, sealing and priming bare areas |
| Access & set-up | 10–20% | Ladders, scaffolding or elevated work, masking windows and edges, protecting gardens and paving |
| Labour (application) | 20–30% | Cutting-in, rolling or spraying walls, eaves, fascias and detail, two coats |
| Paint & materials | 15–25% | UV-stable exterior membrane or low-sheen, primer/sealer, fillers |
This is why a suspiciously cheap exterior quote usually means prep or access has been cut – and under Perth’s sun, that’s exactly where a job fails first.
The six things that change your exterior price
Surface area & storeys
Double-storey adds both m² and access cost – scaffolding and elevated work – so it’s rarely just “double” a single-storey price.
Substrate
Render, brick, fibre-cement, weatherboard, fibro and limestone each need a specific primer and system. Repairs to cracked render or rotten timber add cost.
Condition & prep
Perth’s UV makes old coatings chalk, fade and peel. Washing, scraping, sanding, filling and priming bare areas is the bulk of a quality job.
Access
Steep blocks, high gables, tight boundaries and two storeys all add equipment, labour and time.
Coating system
Premium UV-resistant exterior paints cost more per litre but hold colour and protect far longer in the WA sun – cheaper across the repaint cycle.
Detail work
Eaves, fascias, gutters, downpipes, windows and doors each add cutting-in time on top of the main wall area.
What a single-storey exterior repaint looks like
An indicative breakdown for a single-storey rendered 4×2 in sound condition – walls, eaves and fascias, standard access, a quality two-coat system.
| Wash, prep, fill render cracks, spot-prime | $2,000–$3,000 |
| Render walls – two coats, UV-stable system | $2,800–$4,000 |
| Eaves, fascias, downpipes & detail | $1,000–$1,600 |
| Indicative total | $5,800–$8,600 |
Substrates we paint in Perth (and what they need)
| Substrate | Common in | What it needs |
|---|---|---|
| Rendered double-brick | Most Perth suburbs | Crack repair, an alkali-resistant sealer, a breathable membrane |
| Face brick | Older established homes | Thorough clean, the right masonry primer for a lasting bond |
| Fibre-cement / weatherboard | New estates, extensions, older cottages | Gap-sealing, flexible fillers, a system that moves with the board |
| Limestone | Coastal & heritage (Fremantle, Cottesloe) | Breathable, vapour-permeable coatings – never a sealed film |
| Fibro (asbestos-cement) | Pre-1990 homes | Careful handling, never dry-sanded; encapsulation by a licensed team |
Why Perth exteriors are their own challenge
Western Australia’s UV and heat are harsh on exterior coatings, and coastal suburbs add salt exposure. The right prep and a quality UV-stable system are what stop premature fading and peeling – which is why a cheap “spray and go” job often fails within a few years. We spec the system to the substrate and the WA climate, then give one fixed written price.
How often should you repaint? Depending on exposure and the previous system, commonly every 7–12 years – sun-facing and coastal walls sooner. Repainting before the old coat fails is far cheaper than prepping bare, weathered surfaces later.
Keeping exterior cost down
- Repaint before the old coat fails – bare timber and flaking render cost far more to prepare.
- Address access once – combine the exterior with any high interior or roof work while scaffolding is up.
- Choose a durable system so the next repaint cycle is longer.
- Keep the same colour family to limit the number of coats.
Exterior painting cost FAQs
How much to paint the outside of a house in Perth?
Typically $4,000–$9,000 single-storey and $7,000–$15,000 double-storey, depending on prep, access and substrate.
Why is exterior painting sometimes dearer than interior?
Access (height and scaffolding), weather-damaged surfaces and substrate repairs add prep and equipment cost.
How often should I repaint my exterior in Perth?
Depending on exposure and the previous system, commonly every 7–12 years – sun-facing and coastal walls sooner.
Does the quote include prep and repairs?
A proper fixed quote lists prep, any repairs, the coating system and number of coats – ask for it in writing.
Get an exact exterior price for your home
We inspect, then send a free, fixed, written quote – usually within 48 hours. The right system for your substrate and the WA climate, in writing.
Get a fixed written quote Call 0402 214 353